Back Bay Sit On Top Kayak

A Modular System Approach to SOT Kayak Sailing, Paddling and Mirage Drive Propulsion

BB Scorpion bow obl 8 w

Sit-On-Top (SOT) kayaks are easy boats on which to learn to paddle. They have none of the “get in the coffin and you are about to drown” psychological identity that one finds in the Sit-Inside boats and they’re amazingly adaptable to a wide range of paddling activities. It also doesn’t hurt that they are pretty straightforward boats to rotomold, which makes them very cheap to produce in large numbers.

I didn’t envision just one boat for this niche in the home-built kayak market. Instead, it came to me that there would need to be at least three models that could address the wide-ranging styles of boating interests in this area of the kayak world. The result was a couple of very clean, SOT models at 14’ and 16’ called the Corona and the Back Bay, respectively. The third model was going to be called the Wahoo, as it was specifically designed for the folks who spend a lot of time fishing with their SOT’s. I’ll get to the Wahoo in the next article.

As a canoe and kayak sailor and a guy who had just been out for a test drive on the Hobie Adventure Island, which is based on their 16’ SOT Adventure model, I wanted to offer my own take on what makes for a truly fun and stylish, sailing SOT kayak. The result was that a fully integrated system of component parts was designed for the basic Back Bay. This modular approach allows the Back Bay to go sailing by simply adding a system of light-weight, easily built elements that quickly convert the SOT to a single aka sailing boat called the Scorpion, OR, to a double aka sailing boat with slightly larger ama volume, called the Doubloon. Of the two configurations, the Doubloon is most like the well-known and highly respected, Hobie Adventure Island.

The Corona and the Back Bay are virtually identical models, save for their respective lengths. For the purposes of this article, I’ll focus on the Back Bay version and all the potential add-on systems I’ve incorporated in the design.

THE BACK BAY SOT KAYAK

BB16 above w

Specifications:
Length overall – 16′
Beam overall main hull – 28″
Depth of hull max – 12”
Weight – 48 lbs. or less
Displacement – 335 lbs.

This boat is built in the S&G style of construction in 4mm marine ply with 6 oz. plain weave fiberglass set in epoxy on the inside and outside of the hull for full laminate sandwich strength. The build process uses external cradles as building supports, ensuring that the hull goes together with minimum hassle when handling the rather slender and longish hull panels. The boat is bulkheaded internally at three key points. These bulkheads create not only integrated strength in the design, but they also cleanly separate the hull cavity into four unique volumes for gear storage and watertight flotation.

The Back Bay can be configured with a large, open tankwell set aft of the cockpit, or built with a watertight, aft hatch cover for internal storage in a conventional kayak style.

Scorpion bow low w

Specifications:
Beam overall – 10′
Weight (est.) – 90 lbs.
Sail Area – 56 sq. ft.
Displacement – 350 lbs.
Draft (board down) – 28″

The Scorpion variant is a Sit-On-Top design for fun sailing, paddling, or Mirage peddling… or all three, as the builder desires. There will be a design for a leeboard mount included in the plans for those who are going to build the boat for sailing. Having the aka gull wing form set well forward permits a full paddle swing arc.  The aka beam connectives to the amas is split into a pair of mounting elements. I did this to make for a stronger, single beam mounting struture. With a single beam design, there is a tendency for the am to want to rotate around the beam, making for a very stressed component that could lead to early failure. By splitting the beam and spreading the mounting points, I have given the structure more resistance to this rotational force, making for a more rigid boat in use. This setup will allow the owner to power sail in light air with both the paddle and the sail providing thrust. With the leeboard swung down for sailing, the owner can do some “power sailing” and utilize the Mirage drive, as well as the sail, in light conditions. The Mirage is capable of boosting boat speed enough that it creates apparent wind over the sail, adding power where there really isn’t enough for sailing alone.

The amas are positioned to optimize capsize resistance when sailing off the wind. The amas do not touch the surface of the water at rest in stable trim and provide only minimal wetted surface drag when underway by paddle or peddle. As soon as the sail is loaded by the breeze, though, the ama on the lee side begins to immerse, firming-up the boat and resisting the heeling moments being generated.

The aft deck can be configured as a watertight hatch with full access to the aft sections of the hull, OR a large, diving tank well with self-draining ports. The cockpit is fitted with self-drain ports under the seat as well as forward, in addition to the daggerboard slot. There is a watertight deck plate just forward of the seat, between the knees of the sailor/paddler to provide secure storage for critical items that may be needed on a routine basis. The foredeck has a watertight hatch cover for bow storage needs.

The rig is a fully battened Dacron sail with two reef points and a multi-section, self-supporting mast which steps into a sealed mast socket in the hull. The mast and boom sections can be aluminum or carbon, as budget permits. The sail choice is open for the customer as long as it can be balanced with the fixed positions for the mast and dagger board. The Cunningham is run to the deck of the gull wing aka to keep the rig on the boat in the event of a capsize.

With 56-sq. ft. of sail on a 90-pound boat, this will be a decently speedy boat without being in over its head all the time in a stiff breeze. I suggest two reef points in the sail to allow for sailing in a wide variety of conditions.

This will be a wet boat at speed, yet there are no worries at all for flooding and sinking, save for a truly nasty trip over a reef that shreds the entire underside of the craft. The bow, cockpit and aft hull volumes are all independent, sealed compartments, as are the ama volumes.

Reentry from a swimming session will be easy with a simple, sling, or rope ladder much like those used by rock climbers, called etriers.

BB Scorpion aft obl 8 wSliding foot pedals in the cockpit control the rudder. The rudder flips-up when it encounters an underwater obstacle, or when beaching, returning, due to bungee tension to the deployed position once past the obstruction.

The boat is constructed in a multichine, marine plywood style with epoxy glass laminates inside and out in a stitch and glue style. Stainless T-Nuts are embedded in the hull deck surface from below to provide a secure set of mounting points for the aka wing. The amas are held in place on the aka tips by large bungees and a notched lock system. This system provides for quick setups on the beach.

You just fit the aka to the foredeck, insert four, 1/4″ threaded stainless screws with comfortable, knobbed grips and screw down the aka wing. The amas slip onto the ends of the aka and you lift the pair of 3/8″ bungees up and over two raised hooks on the aka ends to secure the ama in place. Simple, easily maintained and near foolproof in operation.

DOUBLOON SAILING SOT

Doubloon bow obl 8 w

The Doubloon is the second variation on the central SOT theme of this group of boats. In this design, I am looking to provide a more expansive utility application for the base, Back Bay SOT version. The Doubloon is essentially a solo craft and it carries the same, 56 sq. ft. sail, but the overall potential of the boat is expanded through the use of dual akas and full trampolines on both sides of the Back Bay hull. The rendering of the Doubloon shows a daggerboard inserted down through the Mirage Drive trunk, but in use, I would prefer to have the board mounted outside the Back Bay hull as a leeboard. Plans will be supplied with the leeboard solution.

The akas on the Doubloon are spaced to allow for a full paddle stroke with the boat setup as a trimaran. There are two sections of tubing that span the opening fore and aft between the akas from which the tramp is mounted. The trampolines are designed to roll-up on the outer tube section, much like a window shade and they are deployed by an endless loop of light halyard line. With the tramps fully deployed, the inner tube section lifts up and over a holding pin in the aka and the sailor applies as much tension to the tramp as he feels he needs by hauling-in the endless loop line and cleating it off. If a paddling session is desired, he simply pops the jam cleat and pulls the line to roll-up the tramp on the outer tube section. This procedure applies for both port and starboard tramps.

Like the Scorpion, the Doubloon can be built to utilize a Mirage drive in the center well and the need to roll-up the tramps for paddling is essentially negated, (though it is nice to have the option once in awhile as Mirage drives can be difficult to maneuver in tight places)

The aka beams are held to the deck of the Back Bay hull with the same, threaded knob strategy for quick setup and takedown times. Similarly, the amas are held to the aka ends with hefty bungee cords for the simplicity of use. There’s another, rather invisible, benefit to using the bungee cords for ama mounting. Because they are being held in place through a fairly dynamic hold-down system, the amas can move about, ever so slightly, while underway. This allows the amas to have some structural “give” and the result is that the banging and thrashing that is typically experienced by the ama, is somewhat dissipated through the flex of the joining system.

Doubloon aft obl wThe design similarities to the Hobie Adventure Island are obvious. This boat, however, should be just a bit faster in the water, mostly because it will be much lighter than the rotomolded Hobie. For that same reason, it will also be easier to put it up on a roof rack for transport to the water and a lot easier on the back when you have to take it off the car to store it at home. The Doubloon configuration allows the sailor/paddler/peddler to bring along extra gear, which can be lashed to the tramps in waterproof bags. They can also take along kids, or perhaps someone special, who could lounge out on the tramp surface while lazily sailing along for a sunset cruise on a warm summer evening.

All in all, I think the Back Bay SOT should be a really fun boat to own for warm water/warm weather boating adventures. It has the capacity to carry enough gear for several days out on the water. When rigged with a sailing system of your choice, it can also cover some pretty good distances if the winds are favorable. Plans for this boat and all its variations will be available from this site and Duckworks Magazine.

Chris Ostlind

Lunada Design
Chris@Wedgesail.com

Solo 12 and 14

 

I have developed a new, personal trimaran for small adults and kids called the Solo12. This is a car toppable boat that is meant to sail with no facility for human power other than hauling out the spare canoe paddle and getting with it. The total displacement is 300 lbs. all-up and should tip the scales at about 130 lbs. before getting wet. So, there’s room to wiggle for a wiry dude who wants to tool around in quiet waters and have a blast in a semi-reclining position. Steering is via a pair of pedals and cables to the rudder cheek block, much like a kayak and all the sail controls are fed forward so there’s no need to hike out at all.

The sail area is 56 sq ft. The amas are generously sized to avoid getting out of the cockpit except to hang-out on the beach with friends and have some lunch. Lateral resistance will be provided by a side mounted leeboard on a swivel mount. This will give the boat plenty of upwind lift while being a safety oriented feature that kicks up and out of the way for beaching, or encountering underwater obstacles

The aka tubes are aircraft aluminum and will be segmented with the same spring pins and fitted ferrules you see on take-a-part paddles, so that the amas will reconnect right up next to the main hull for transport and storage. A very compact unit for putting on the roof of your car and going off to the beach, or lake, for some fun.

The build is 3mm marine ply with a full layer of glass outside and taped joints inside. Easy to build, easy to move around the launch site and perfect for learning to sail with little kids as they can sit between your legs and learn how things work. Later, the same kids can take the boat out on their own and there will be no fear of them tipping over unless a tornado hits the area.

There is a companion model at 14′ LOA for slightly larger sailors, all within the car-topping attitude that this boat represents. The SOLO 14 has an optional ama design that allows the removal of the leeboard as the lateral resistance will come from the underwater fin shapes of the amas. This keeps the stuff hanging in the water to a minimum while still allowing a decent performance capability. fewer moving parts will mean simpler maintenance and less stuff to possibly break while out sailing. The rendering above shows the finned amas in place.

Chris Ostlind
Lunada Design
Chris@Wedgesail.com

Collage

Another Trimaran/Skiff … Bigger, With More Power

 

Collage aft obl 5x7

 

Well, you had to know this would happen…

When the Montage Skiff/Trimaran was introduced, the Lunada Design website was absolutely flooded with an ocean of page hits every day right after the article was posted. I received several dozen personal query letters regarding the boat and sizeable slice of them were directed at the potential of a bigger version of the Montage.

The concept of being able to build your own boat and rig it with a used mast and possibly even used sails, (if they are in good enough condition) had struck a chord with the homebuilding community. The creation of a larger version of the Montage would take the specified rig choices up into the much more commonly found beach cat rig sizes and make the business of finding a used rig in great shape, a whole lot easier. After pencilling a collection of thoughts and running some rough numbers on the potential, the idea came into focus as the 18′ Collage.

The new boat is very much like the smaller Montage in many ways. The Collage has very similar lines, with the exception that it can be quickly Collage-Montage profile comparison 5x7identified by its subtle, reverse bow profile. It has  a virtually identical purpose and the same, functional conceptual pragmatism for the homebuilder. The plywood version and the strip-built design both have the same bow profiles. This profile is also applied to the amas of both build styles. I wanted to give the boat a bit more of an aggressive look without taking it too far in the direction of the out and out racing multihull designs currently in vogue.

The ama shapes, especially on the smooth hulled variation, borrow other design cues from the modern performance dedicated French designs of VPLP, as well as the very cool work of Nigel Irens. The transoms are nudged in the direction of a triangular shape, while retaining some of the typical beach cat, flat-topped U-form feeling. The volume concentration is well-forward, with the foredecks being much more rounded to provide rapid shedding of water. These shapes will help to reduce the tendency of multihulls to pitchpole when sailed hard.

Collage bows tight 5x7Collage bow obl w

 

Breaking away to some degree, from the single, build style of the Montage offering, the Collage is presented as a fully strip built, smooth hulled version, as well as a multichine plywood version. These choices will give builders the ability to work with the material choices and aesthetics they prefer. I am also looking at the potential for a foam cored sandwich laminate boat using the vertical strip technique, though that iteration will probably come around a little later in the process.

Collage bow obl 5x7

Collage Specs

LOA 18′  ( 5.48 m )
BOA 14′  ( 4.26 m )
BOA main hull 41″ ( 1.04 m )

Sail Area
Main 163 sq. ft. (15.14 sq, m.)
Jib 55 sq. ft. ( 5.12 sq. m. )
Spinnaker 161.5 sq. ft. ( 15 sq. m. )

Displacement 1000 lbs. ( 454.5 kg. )
Weight 380 lbs. ( 172.7 kg. )

The Collage meets all the same design criteria as does the Montage, except it’s longer and wider, has more sail area, carries more crew weight and yes, it’s going to be faster in the right hands. Faster… sometimes this term can be kinda self-defeating when speed claims are made compared to another boat. When it comes to recreational boats, I’m of the opinion that speed is a relative thing based on the overall design brief of the boat in question. In the case of the Montage and Collage designs, speed is one of the attractive elements as long as it is kept in perspective with  just what the use application will be from day to day. From where I sit, this will be primarily recreational purposes.

Collage wide angle 5x7

The Sail Area to Displacement ratio ( SA/D ) for each of the boats is as follows: The Montage is 31.56 and the Collage is 34.88 With both of these boats being sailed at near max displacement, I give the nod to the Collage, based on waterline length, as well as the ability to punch through wave conditions that will toss the Montage around to some degree.

I would like to see this pair of boats ( Montage and Collage ) blasting around in the hands of skilled sailors. There’s nothing quite like the feel of a performance boat and the way it can deliver the exhilaration of a spirited ride. But… I’d also like to see this boat out on the water being used by families while they have a really fun day on the water with, maybe, a somewhat toned-down speed blast tossed into the mix every now and then to get the kids chirping.

Collage bow very low 5x7

I’m looking at the potential for the Collage to create a new beach and/or lake sailing culture in which energetic hot shoe dudes, as well as young sporting families, can all mingle on the beach, out on the water and share a communal BBQ after the day of sailing. I grew to maturity on the beaches of SoCal watching the brand new Hobie Fleets do this very thing and it was a lifestyle that perfectly fit my beach kid way of thinking. It would be great to see that happen once again. Could this take place in 2009? Hey, I don’t know the answer to that one, but it is fun to think of the boat and its owners in those terms.

There’s a lot going for the Montage/Collage design approach to support such a social event concept. Both boats are affordable to build, they are easily trailered by even sub-compact cars, they make use of “experienced” parts that can be had on the open market for pennies on the dollar when compared to new parts and they are boats that are easily sailed on the first day. This last part is important, as the boat will attract more enthusiasts when they see that they can be sailed with what pretty much passes for beginner’s skills. Just because it can go fast, does not mean it has to be sailed that way. As the owner’s skills grow, the boat’s potential will be there waiting for him.

Collage flying hull 5x7

As a way of introducing the Montage and the Collage designs to the homebuilder market, I’d like to offer free plans to one person. This builder should be able to show me that they have a very strong interest in either design and are willing to build the boat as I supply the plans in accordance with their progress from the previous plan set delivery.

If interested in this offer, you can write me at: Chris@Wedgesail.com or at lunadadesign@gmail.com and make your pitch. The one chosen to receive the free plans will be willing to provide construction photos of their progress and a brief written description as to how things are going. The personal accounts will be published on this website, Lunadadesign.net so that the readers of the site can follow the projects.

Chris Ostlind
Lunada Design

Montage

Family Oriented Trimaran/Skiff With Performance
Montage bow water w
I’ve drawn a lot of small trimarans in the last seven years, beginning with my A18 for performance coastal cruising. During that time period, there has been an explosion of other small, daysailing trimarans on the market. Several years ago, a new trimaran/skiff hybrid was introduced from a clever group of guys in New Zealand called the Weta.  www.wetamarine.com

 

This boat created immediate appeal to beginning and intermediate sailors. It offers much of the speed experience of a high performance skiff in a stable and predictable platform that is really tough to capsize. The Weta is one of the first boats to encourage family participation and reintroduces the waterborne fun of the beach sailing culture, established way back in the late 60’s with the intro of the Hobie catamaran.

A brand new, factory built Weta goes out the door for USD $11K. Realistically speaking, this isn’t an in surmountable amount of money for a factory produced, brand new carbon trimaran. It is, however, quite a lot of money for most casual recreational enthusiasts and the folks who like to build their own boats… especially when you consider the rugged economic conditions we all face these days.

So, I decided to take a whack at producing a set of plans for a homebuilder’s version of a Weta-like hybrid
that could be Montage aft up wbuildable in the neighborhood of $5600 ready to sail with a new mast, sails and trailer. I’m calling the new boat Montage, as it is an assemblage of concepts that fill the slot between a performance skiff and a small, quick trimaran. This boat will appeal to sailing enthusiasts from kids to codgers who just want to get out on the water and have a fun and fast experience without breaking the bank.

The estimated $5600 figure represents a boat with a whole host of brand new parts. For the clever builders out there, the Montage could be even less expensive if they can find a used 470 rig, perhaps a used small craft, or beach cat trailer that could be modified to fit the hull design and even a collection of hardware in good condition. The Montage is a very light boat at right around 235 lbs., so you do not need to buy a heavy duty trailer.

Montage bow obl wAfter a dozen different sketches of boats that fit the general design motif, I settled on a plywood multichine hull design that had virtually the same dimensions
as the manufactured version.  When I projected the hull panels to a two dimensional layout, though, I saw that I was going to be wasting a good bit of plywood by going with a 14′ 5″ boat that mimicked the dimensions of the production version.

I went back to the drawing table and reconfigured everything so that the longest hull panel was going to just fit on a couple of sheets of marine ply laid end to end. The main hull also got just a bit wider in the process of lengthening the boat. Where the factory boat uses carbon fiber on foam cores for its structure, the Montage will be a 4mm marine plywood design with full fiberglass/epoxy sandwich laminates inside and out. The foredeck and the cockpit seating transitions are strip-built in Red Cedar to give the overall appearance of the boat a smoother, more organic feel than straight plywood panels.

Montage R bow obl

The amas for Montage came from a 16′ trimaran design that I had already done and required minimal re-design to work with this boat. The amas are also designed as multichine ply forms with pretty high volume shapes well forward and a water shedding deck form that will helps to keep them riding high even when driven hard. Ama displacement is 100% of the all-up boat weight when sailing.

Montage Specifications

LOA                                   15′ 6″
BOA                                   12′
BOA main hull                  41″

Main                               110 sq. ft.
Jib                                      38 sq. ft.
Screacher                      102 sq. ft.

Displacement                 650 lbs.
Weight                             235 lbs.

The aka beams are anodized aluminum instead of carbon tubing. The inboard ends fit into fairly burly sockets in the hull and are held in place with quick release pins. Flat deck flanges on the ama ends are welded in place and bolted to the amas. The amas are removable from the aka tubes for repair or maintenance, but otherwise stay mounted, along with the trampolines, as complete units.

The mast is also anodized aluminum. The boat uses the same mast section as the 470 dinghy, which is a Proctor Cumulus section. This mast is available on the used market with a little bit of hunting around. If you want it all and have the money, then there’s a very cool, filament wound Forte carbon spar available with very close specs to the Proctor that will rock your world. http://fortecarbon.com/

Making these two changes from the benchmark, all-carbon Weta to an aluminum spar and tubing keep the costs down, with but a slight weight penalty over all-carbon parts. If you find a used mast, the savings will be even more substantial.

Montage Above wThe mainsail and the jib will be built in Dacron instead of a more expensive fiber/Mylar laminate sail. The jib is a self-tacking blade. The main is a boomless design, which will keep head bonking incidents out of the picture while sailing. The screacher is furled from the bowsprit for simple convenience.

I have found that the more expensive sailcloth laminates are capable of driving the boat just a bit faster, but for the average recreational sailor, they will hardly ever make a difference compared to more forgiving sails in Dacron. Dacron is much easier to maintain, lasts longer, is a lot more tolerant of UV exposure and can be repaired by any sail loft wherever you go. If the builder of the Montage really wanted to, they could buy a set of sails in something like Pentex laminate instead and they’d have that hot, performance boat look that some desire along with just a bit more zip under sail.

The overall design of the foils and their operation is pointed directly at the needs of a recreational sailor. The boat uses a centerboard for ease of use
and pretty much no-brainer beaching. Likewise, the rudder is a flip-up style unit that eliminates the problems of hitting Montage aft low wunderwater objects. The foils will be built with template shaped cedar cores having a white ash stringer for stiffness and then glassed for durability.

The aluminum aka tubes will be sold pre-bent and ready to install on the amas. If the builder has access to a good mandrel bending facility that can handle the OD/ID specifications of the tubing, they can fabricate their own tubes to supplied specs.

The Montage is designed to be a really fun day sailing machine that can generate near performance skiff sailing speeds while offering a hugely stable platform for recreational sailing. Construction of the boat is very straightforward in marine plywood with glass/epoxy laminates and can be easily built by any sailing enthusiast who has household handyman skills with tools. The Montage has been created to offer homebuilders an opportunity to enjoy this style of family sport boat at a completed cost that is far less expensive than the manufactured version.

CHRIS OSTLIND

Lunada Design

FRESH TAKE ON THE SOLO16 S

A safe, speedy solo cruising craft for adventurous souls

Solo16 S w

After a lot of input from readers of this site, I have completed the modifications to the Solo16 S design that reflect many of their
expressed interests.

The Solo16 S now has a bit more displacement as a direct response to suggestions for the use of a small 2 hp outboard and some spare fuel. At the same time, the vaka hull was given additional beam above the waterline and the shear was raised some to allow for mods to the amas.

Solo16 aft obl w

The amas, themselves, were made slimmer and taller, while retaining the same volume. They now have a slight vee section which gives the boat a progressive resistance increase as the amas are pressed heavily in a gust.

To complete the changes, a sporty all-weather soft cabin has been designed to allow the owner a chance to sail in a wide spectrum of conditions. The new cabin is modular in its approach with the ability to address a multitude of sailing situations.

Solo16 S weather cabin wThere is a folding dodger setup forward with a large PVC window for full visibility. A removable Bimini top extends aft, covering the entire cockpit from rain and a relentless sun. Side panels can be put in place as needed to protect the crew from hard spray, or to further enclose the cockpit. A reversed dodger is positioned at the aft end of the cockpit completing the full cabin system.

All panels except the Bimini have generous window areas which are backed by micro mesh screen that is small enough to keep out the No-See-Ums. The PVC windows are zip-out removable and the screens can be rolled-up for maximum airflow through the cockpit. The complete enclosure system allows the owner to mix and match the panels as needed for the best protection from the elements.

Solo16 S weather cabin aft wThe Solo16 S is a lightweight, trailered boat with demountable amas. The aka beams stay mounted to the amas, along with the trampoline surface. The aka ends fit into composite tubes which are bonded to the vaka hull and the side hiking platforms.

When setting up the boat for sailing while on the trailer, the owner simply lifts the ama assembly, rotates and places the ends of the aka tubes into the matching vaka openings and slides the ama into place. The akas are fully seated when their internal, spring loaded snap-buttons click into place. The entire ama assembly is easily handled by one adult with modest physical strength.

Solo16 S folded for trailering

In the trailering mode, the complete boat does not exceed 68″ (1.7 m) in width, falling well under every trailer width limit in the world.

Chris Ostlind

Lunada Design